DCP 100

DCP 100 Digital Cinema Processor

 

dcp100f.jpg

Front

  1. Power Switch – also controls DCA amplifiers for easy one-touch power control
  2. Full-Range Booth Monitor Speaker
  3. Booth Monitor Volume and Parameter Adjustment
  4. LCD Touch Screen – for easy set-up and operation
  5. Power and Protect Mode LEDs
  6. Auditorium Fader
  7. Master Mute

dcp100b.jpg

Back

  1. Universal Mic/Line Input
  2. Stereo RCA Input
  3. 8-channel DB-25 Main Analog Input compatible with most film processors
  4. Digital Server Input AES3 pairs 1-4
  5. Digital Server Input AES3 pair 8, HI/VI
  6. SPDIF Input
  7. USB for system configuration
  8. Ethernet – for monitor and control via QSControl.net™
  9. SD Memory Card – stores configuration data
  10. RS-232 automation interface
  11. 8 DataPort Connections – allows full network control and monitoring of DCA amplifiers
  12. Hearing and Visually Impaired Outputs
  13. Line Level External Booth Monitor Output
  14. 2 User Programmable Logic Outputs
  15. 2 User Programmable Relay Outputs
  16. 6 Automation Inputs – can select up to 32 preset formats and relay/logic modes
SPECIFICATIONS

Front Panel Controls

Power switch

Rocker switch

Mute control

Push button

Auditorium fader

Rotary encoder

Monitor volume/parameter adjust

Rotary encoder

Menu-driven LCD

Touch control LCD

 

Rear Panel Connectors

D-Cinema input

DB-25: AES3/EBU channels 1-8
DB-25: AES3/EBU channels 15 &16 (HI/VI)

Audio Formats

5.1, 5.1EX, 7.1DS

Analog Input

DB-25: Analog audio channels 1-8

Universal Mic / Line input

XLR: Mic (+ phantom pwr) or line level

S/PDIF input

RCA: Stereo digital audio interface and Lt/Rt matrix

RCA (L/R) inputs

RCA (2): Left and right line level, stereo and Lt/Rt matrix

DataPort outputs

HD-15 (8): QSC amplifier interface

Automation inputs

6-pin Euro-style (2) TTL compatible dry contact closure

Serial Control

DB-9 RS-232 serial interface

Logic output

4-pin Euro-style (2) outbound control

Relay outputs

6-pin Euro-style (2) outbound control

USB port

Config and management interface

QSControl and SNMP RJ45

10/100 Mbps network management

SD card receptacle

Configuration memory card (1 GB min)

 

HI/VI Impaired Output

Output stage type

Single ended (balanced Z)

Output impedance

50 Ohms

Nominal output level

-11.8 dBu (200 mVrms)

Loading requirements

Rmin = 2k Ω, Cmax = 4 nF

 

QSControl Network

Protocol

Standard TCP/IP implementation over Ethernet or Fast Ethernet.

Data rate

10/100 Mbps

Connection
requirements

Cat-5 UTP cable or better (100m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN

Line voltage requirements

100 VAC – 240 VAC, 50/60 Hz

Dimensions (HWD) inches

5.25" x 19" x 15.2"

Dimensions (HWD) mm

 133 mm x 483 mm x 386 mm

Weight

16.6 lb / 7.5 kg