DCP 200

DCP 200 Digital Cinema Processor

 

dcp200f.jpg

Front

  1. Power Switch – also controls DCA amplifiers for easy one-touch power control
  2. Full-Range Booth Monitor Speaker
  3. Booth Monitor Volume and Parameter Adjustment
  4. LCD Touch Screen – for easy set-up and operation
  5. Power and Protect Mode LEDs
  6. Auditorium Fader
  7. Master Mute

dcp200b.jpg

Back

  1. Universal Mic/Line Input
  2. Stereo RCA Input
  3. 8-channel DB-25 Main Analog Input compatible with most film processors
  4. Surround and Le/Re Inputs – compatible with Cat 791 option card
  5. Digital Server Input AES3 pairs 1-4 and pairs 5-8
  6. SPDIF Input
  7. USB for system configuration
  8. Ethernet – for monitor and control via QSControl.net™
  9. Dual CobraNet™ Ports (for DXP)
  10. SD Memory Card – stores configuration data
  11. RS-232 automation interface
  12. 6 DataPort Connections – allows full network control and monitoring of DCA amplifiers
  13. Hearing and Visually Impaired Outputs
  14. Line Level External Booth Monitor Output
  15. 2 User Programmable Logic Outputs
  16. 2 User Programmable Relay Outputs
  17. 6 Automation Inputs – can select up to 32 preset formats and relay/logic modes
SPECIFICATIONS

 

Front Panel Controls

Power switch

Rocker switch

Mute control

Push button

Auditorium fader

Rotary encoder

Monitor volume/ parameter adjust

Rotary encoder

Menu-driven LCD

Touch control LCD

 

Rear Panel Connectors

D-Cinema input group 1

DB-25: AES3/EBU channels 1-8

D-Cinema input group 2

DB-25: AES3/EBU channels 9-16

Main analog input

DB-25: Analog audio channels 1-8

Extended surround input

DB-25: Surround and Le/Re channels

Universal Mic /
Line input

XLR: Mic (+ phantom pwr) or line level

S/PDIF input

RCA: Stereo digital audio interface and Lt/Rt matrix

RCA (L/R) inputs

RCA (2): Left and right line level, stereo and Lt/Rt matrix

DataPort outputs

HD-15 (6): QSC amplifier interface

Automation inputs

6-pin Euro-style (2) TTL compatible dry contact closure

Serial Control

DB-9 RS-232 serial interface

Logic output

4-pin Euro-style (2) outbound control

Relay outputs

6-pin Euro-style (2) outbound control

USB port

Config and management interface

QSControl and
SNMP RJ45

10/100 Mbps network management

CobraNet RJ45s

100 Mbps primary/backup network audio

SD card receptacle

Configuration memory card (1 GB min)

   

HI/VI Impaired Output

Output stage type

Single ended
(balanced Z)

Output impedance

50 Ohms

Nominal output level

-11.8 dBu (200 mVrms)

Loading requirements

Rmin = 2k Ω,
Cmax = 4 nF

 

Audio Network

Protocol

CobraNet version 2 protocol

Data rate

100 Mbps (Fast Ethernet)

Ports

1 Primary, 1 Backup (auto-failover)

Connection
requirements

Cat-5 UTP cable or better (100m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN

 

QSControl Network

Protocol

Standard TCP/IP implementation over Ethernet or Fast Ethernet.

Data rate

10/100 Mbps

Connection
requirements

Cat-5 UTP cable or better (100m maximum length), direct connection to wired network switch ports only, dedicated LAN or VLAN

Line voltage
requirements

100 VAC – 240 VAC, 50/60 Hz

Dimensions (HWD) inches

5.25" x 19" x 15.2"

Dimensions (HWD) mm

133 mm x 483 mm x 386 mm

Weight

16.6 lb / 7.5 kg